V6C GPS Location Terminal Built-in 5000mAh Battery For Cars

V6C GPS Location Terminal Built-in 5000mAh Battery For Cars Introduction:

1. SIM card installation method

    The device is using a standard SIM card. The card slot is a self-bouncing card slot, the chip is placed face down, and the card notch is inserted into the card slot.

2. Indicator light description

2.1 Red light - charging indicator

2.2 Yellow light-GSM indicator light

2.3 Blue light-GPS indicator

3. Working logic

3.1 Normal mode: 

In working mode, the position is transmitted once every 30 seconds by default, and after 3 minutes of inactivity, the device enters standby mode. In standby mode, the device transmits a heartbeat every 5 minutes to keep the server connected, and the device can be woken up to work by vibrating.

3.2 Power-saving mode: 

In the working state, the default position is transmitted once every 30 seconds. After 3 minutes of inactivity, the device enters the sleep state. In the sleep state, the device does not transmit data, disconnect the server, save power, and the vibrating device can be awakened to a working state.

3.3 Smart mode: 

Set the data upload interval, and the device operates according to the set interval. During non-working hours, the device is in a dormant state, vibration cannot wake up.

3.4 Description of the above default status:

1) Working status: The device's working light is on, and both GPRS and GPS are in working status.

2) Standby state: Device transmits heartbeat, GPRS is working (heartbeat data uploading), and GPS is not working.

3) Dormant state: The device is in a hibernate state and neither GPRS nor GPS works.

V6C GPS Location Terminal Built-in 5000mAh Battery For Cars Features:

1) STM's advanced 32-bit high-performance MCU processor is adopted;

2) Support multiple functions such as remote pickup, vibration alarm, overspeed alarm, and removal alarm;

3) Support the electronic fence function. The user delimits a virtual electronic fence through the platform/APP. When equipment enters or exits the fence, it can be recognized by the platform and send an alarm;

4) When an alarm occurs, it is possible to send an alarm short message/phone to the monitoring number, and the alarm is uploaded to the platform at the same time;

5) The terminal adopts a well-known manufacturer's industrial grade high stability LTE module with a built-in LTE high sensitivity antenna, supports TCP/IP data transmission, and supports domain name/IP address connection to the server;

6) Built-in mass storage chip, supporting offline data storage and supplementary transmission of blind area data; When the vehicle is in a place with weak wireless signals or severe interference, the vehicle may temporarily store the vehicle operation data in FLASH, and when the wireless signal returns to normal, it can supplement these data to achieve data omission;

7) Built-in 3-axis acceleration sensor, integrated with accurate acceleration algorithm, real-time acquisition of vehicle status judgments such as the current posture of the vehicle;

8) High sensitivity GPS/BDS dual star locating module, anti-interference ceramic antenna, achieving more stable satellite search signal, supporting AGPS fast locating and tracking, synchronous time service;

9) Support online remote upgrade and remote configuration of product parameters;

10) Three working modes, which can adapt to various scenarios and applications.

V6C GPS Location Terminal Built-in 5000mAh Battery For Cars Parameters:

V6C GPS Location Terminal Built-in 5000mAh Battery For Cars Applications:

1) Insurance industry

2) Corporate fleet industry

3) Automobile manufacturers/4S stores

4) Individual users

5) Electric new energy fields

6) Passenger vehicles

7) Taxis

8) Rental vehicles